SG-8101CB 86.4000M-TBGSA0

Oscillators Overview

The SG-8101CB 86.4000M-TBGSA0 is a standard crystal oscillator (XO) manufactured by Epson, operating at a frequency of 86.4 MHz with CMOS output. It supports supply voltages from 1.8V to 3.3V and features standby functionality for power management. The device offers ±15ppm frequency stability and operates within a temperature range of -40°C to 85°C. Typical supply current is 6.8mA, while disabled current is 1.1µA. It is housed in a compact 4-SMD, no-lead package measuring 5.00mm x 3.20mm with a maximum height of 1.30mm.

Oscillators Feature Summary

• Integrated standby function for effective power down management
• CMOS output signal compatibility for digital logic interfaces
• Compact surface-mount design suitable for space-constrained PCB layouts

Oscillators Applications

• General-purpose clock generation for embedded systems
• Timing reference for consumer electronic devices
• Clock source for industrial control modules

Oscillators Procurement Notes

Verify the specific frequency tolerance and load capacitance requirements against the target circuit design before procurement. Confirm that the 4-SMD no-lead package dimensions align with the designated footprint on the printed circuit board. Ensure the operating voltage range matches the system power supply rails. Check for any specific reflow soldering profile recommendations provided in the official datasheet to maintain component integrity during assembly processes.

Oscillators Selection Notes

Select this component when a precise 86.4 MHz timing reference is required for CMOS-based digital circuits. Consider the ±15ppm stability specification for applications where moderate frequency accuracy is sufficient. Evaluate the low standby current capability if power efficiency is a critical design constraint. Compare the physical dimensions against available board space to ensure mechanical fit within the enclosure constraints.

Oscillators Part Context

This part belongs to the SG-8101 series of standard clock oscillators from Epson Timing. The series is designed for general-purpose applications requiring reliable timing signals. The SG-8101CB variant specifically denotes the package type and operational characteristics within this family. These oscillators are widely used in various electronic equipment due to their balance of performance, size, and power consumption.

Oscillators Replacement Considerations

Direct substitutes may include other Epson SG-8101 series parts with compatible frequencies or pin-compatible alternatives from manufacturers like SiTime or TXC. Verify electrical parameters such as voltage range, output type, and stability before substitution. Ensure mechanical dimensions match the existing footprint to avoid redesign.