SN74LVU04ARGYR

Inverter Gates Overview

The SN74LVU04ARGYR is a hex inverter from the LVU logic family, housed in a 14-pin VQFN package. It operates on a supply voltage range of 2 V to 5.5 V and supports mixed-mode voltage operation across all ports. The device features unbuffered outputs with a maximum propagation delay of 6.5 ns at 5 V. It provides robust ESD protection exceeding JESD 22 standards and latch-up performance greater than 250 mA per JESD 17.

Inverter Gates Feature Summary

• Supports mixed-mode voltage operation on all ports
• Features unbuffered outputs for direct signal inversion
• Provides high ESD protection exceeding standard ratings

Inverter Gates Applications

• Mixed-voltage signal level translation
• General-purpose digital logic inversion
• Battery-powered electronic systems

Inverter Gates Procurement Notes

Verify the specific ordering suffix RGY to confirm the QFN package configuration. Ensure the procurement channel sources genuine Texas Instruments components to guarantee compliance with the specified electrical characteristics and reliability standards outlined in the official datasheet.

Inverter Gates Selection Notes

Select this component when a compact surface-mount solution is required for low-voltage applications. The LVU series is optimized for 2-V to 5.5-V operation, making it suitable for portable devices. Consider the unbuffered output structure and thermal impedance specifications during PCB layout planning.

Inverter Gates Part Context

This part belongs to the SN74LVU04A family of hex inverters manufactured by Texas Instruments. The 'RGY' suffix specifically denotes the 14-lead Very Thin Quad Flat No-Lead (VQFN) package variant designed for space-constrained printed circuit board assemblies.

Inverter Gates Replacement Considerations

SN74LVU04ADBR

Inverter Gates FAQ

Does the SN74LVU04ARGYR have internal pull-up or pull-down resistors?

No, the datasheet specifies that these are hex inverters with unbuffered outputs and does not list any internal pull-up or pull-down resistors.

What is the recommended handling for unused inputs?

All unused inputs must be held at VCC or GND to ensure proper device operation and prevent undefined states.