SX3M8.000A10F20TNN

Oscillators Overview

The SX3M8.000A10F20TNN is a standard clock oscillator manufactured by Shenzhen SCTF Electronics, designed for precise timing applications in electronic circuits. It operates at a nominal frequency of 8 MHz with a CMOS output mode suitable for digital logic interfacing. The device functions within a supply voltage range of 5V and draws a typical operating current of 10mA. Frequency stability is specified at ±30ppm over the full operating temperature range, while initial frequency tolerance is maintained at ±20ppm. It supports enable and disable control functionality via the input pin. The component is housed in a compact 4-SMD, No Lead package with dimensions of 3.2x2.5mm, ensuring compatibility with surface-mount assembly processes.

Oscillators Feature Summary

• CMOS output interface compatible with standard digital logic families
• Integrated enable and disable control capability for power management
• Compact 3.2x2.5mm SMD footprint optimized for space-constrained PCB layouts

Oscillators Applications

• General-purpose clock signal generation for microcontrollers
• Timing reference sources for communication interfaces
• Digital system synchronization in consumer electronics

Oscillators Procurement Notes

Verify that the specific part number matches the required 5V supply voltage and 8MHz frequency specification. Confirm the package type is the 4-SMD No Lead variant to ensure mechanical fit. Check datasheet revisions for any updates to electrical characteristics or thermal ratings before finalizing procurement decisions.

Oscillators Selection Notes

Select this component when a 5V supply and CMOS output are required for an 8MHz clock source. Consider the ±30ppm stability requirement against system timing constraints. Evaluate the 10mA current draw against total power budget limitations. Ensure the 3.2x2.5mm package size fits within the designated board area.

Oscillators Part Context

This oscillator belongs to the SX3M series from Shenzhen SCTF Electronics, which offers various frequencies and packages. The SX3M8.000A10F20TNN specifically targets applications needing a stable 8MHz reference with CMOS outputs. It complements other variants in the lineup that may offer different voltages or tolerances.

Oscillators Replacement Considerations

Direct substitutes include the SX3M8.000B10F20TNN, though it typically operates at 3.3V. Verify voltage compatibility before substitution. Other 8MHz CMOS oscillators from different manufacturers require re-evaluation of pinout, stability, and package dimensions.