SX5M16.000A20F30TNN

Oscillators Overview

The SX5M16.000A20F30TNN is a surface-mount crystal oscillator manufactured by Shenzhen SCTF Electronics. It operates at a nominal frequency of 16 MHz with a total frequency tolerance of ±20 ppm. The device supports a supply voltage range of 1.62V to 3.63V and functions within an operating temperature range of -40°C to +85°C. It utilizes a 4-SMD, no-lead package configuration.

Oscillators Feature Summary

• Features a CMOS-compatible output interface suitable for digital logic circuits.
• Includes a 5V enable/disable control function for power management.
• Designed for surface mounting with reflow soldering compatibility.

Oscillators Applications

• General-purpose clock signal generation in embedded systems
• Synchronization in portable electronic devices
• Timing reference in networking equipment

Oscillators Procurement Notes

Verify the specific supply voltage requirements against the target circuit design, as the component supports a range from 1.62V to 3.63V. Confirm that the 16 MHz frequency aligns with system timing specifications. Ensure the 4-SMD package footprint matches the PCB layout constraints. Check for RoHS compliance status if environmental regulations apply to the final assembly.

Oscillators Selection Notes

Select this model when a standard CMOS output oscillator is required for applications needing a 16 MHz reference. The wide supply voltage range allows flexibility in power domain integration. The enable/disable pin provides additional control over power consumption during idle states. Consider the operating temperature range to ensure reliability in the intended environmental conditions.

Oscillators Part Context

This component belongs to the series of active crystal oscillators produced by Shenzhen SCTF Electronics. These devices are designed to replace discrete crystal and resonator combinations by providing a stable, ready-to-use clock signal. The series typically offers various frequencies and package options to suit different size and performance requirements in consumer and industrial electronics.

Oscillators Replacement Considerations

Direct substitutes must match the 16 MHz frequency, 4-SMD package, and CMOS output type. Verify that any replacement part supports the same supply voltage range and includes the enable/disable functionality if required by the design. Thermal characteristics and frequency stability specifications should also be compared to ensure equivalent performance.