UPC4082G2-E1-A

$1.02

Description：LINEAR IC
Series：*
Mfr：Renesas Electronics Corporation
Package：Tape & Reel (TR),Cut Tape (CT)

SKU:b186ab0731e3 Category: Instrumentation, Op Amps, Buffer Amps Brand: Renesas Electronics Corporation

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

UPC4082G2-E1-A is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Renesas Electronics Corporation. Its product description is LINEAR IC. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for UPC4082G2-E1-A

Description：LINEAR IC
Series：*
Mfr：Renesas Electronics Corporation
Package：Tape & Reel (TR),Cut Tape (CT)
Amplifier Type：-
Number of Circuits：-
Output Type：-
Slew Rate：-
Gain Bandwidth Product：-
Current - Input Bias：-
Voltage - Input Offset：-
Current - Supply：-
Current - Output / Channel：-
Voltage - Supply Span (Min)：-
Voltage - Supply Span (Max)：-
Operating Temperature：-
Grade：-
Qualification：-
Mounting Type：-
Package / Case：-
Supplier Device Package：-
-3db Bandwidth：-

Instrumentation, Op Amps, Buffer Amps datasheet and documents for UPC4082G2-E1-A

UPC4082G2-E1-A

Instrumentation, Op Amps, Buffer Amps Overview

The UPC4082G2-E1-A is a dual operational amplifier manufactured by Renesas Electronics, housed in an SOP-8 surface-mount package. It operates within a supply voltage range of 5 V to 16 V and supports an operating temperature range from -20°C to +80°C. Key electrical specifications include a slew rate of 13 V/µs, an input offset voltage of 5 mV, and an input bias current of 400 pA. The device provides an output current of 10 mA per channel, with a common-mode rejection ratio of 70 dB and a power supply rejection ratio of 70 dB. Input voltage noise density is specified at 25 nV/√Hz.

Instrumentation, Op Amps, Buffer Amps Feature Summary

Dual-channel architecture providing two independent amplification paths within a single integrated circuit.
High-speed performance characterized by a 13 V/µs slew rate for rapid signal transitions.
Low input bias current specification suitable for high-impedance sensor interfaces.

Instrumentation, Op Amps, Buffer Amps Applications

Signal conditioning circuits requiring moderate bandwidth and low noise
General-purpose analog processing in industrial control systems
Audio pre-amplification stages

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the current lifecycle status before integration, as this component may be subject to obsolescence or discontinuation by the manufacturer. Confirm that the SOP-8 package dimensions align with existing PCB footprints. Ensure that the specified operating temperature range meets the environmental requirements of the final assembly. Cross-reference the datasheet for any recent revisions that might affect pin compatibility or electrical characteristics.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when a dual operational amplifier with a 13 V/µs slew rate and 5 mV input offset voltage is required. It is appropriate for designs needing a 5 V to 16 V supply range and 10 mA output drive capability. Consider the SOP-8 package for space-constrained surface-mount applications. Evaluate the 25 nV/√Hz noise density against system noise budgets.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the UPC4082 series of linear IC operational amplifiers produced by Renesas Electronics. It is categorized under Op Amps - Operational Amplifiers within the Amplifier ICs sub-category. The device is designed for general-purpose analog signal processing tasks requiring dual-channel functionality in a compact form factor.

Instrumentation, Op Amps, Buffer Amps Replacement Considerations

No publicly confirmed substitute part numbers are available in the provided documentation. Verify compatibility with alternative dual op-amps based on matching electrical parameters such as slew rate, offset voltage, and package type.