VS-VSKL105/06

SCRs - Modules Overview

The Vishay VS-VSKL105/06 is a thyristor/diode module rated for 105 A average current and 600 V repetitive peak reverse voltage. It utilizes the AAP Gen 7 (TO-240AA) package with an exposed direct bonded copper substrate for low thermal resistance. The device features a maximum non-repetitive surge current of 2094 A at 60 Hz, a junction temperature range of -40 to +130 °C, and a maximum gate trigger voltage of 2.5 V at 25 °C.

SCRs - Modules Feature Summary

• Utilizes exposed direct bonded copper substrate for excellent thermal performance
• Designed and qualified for industrial level applications
• Features UL approved file E78996 certification

SCRs - Modules Applications

• High voltage regulated power supplies
• Lighting circuits
• Temperature control circuits
• Motor speed control circuits
• UPS systems

SCRs - Modules Procurement Notes

Verify the specific circuit configuration code 'L' corresponds to the SCR/diode doubler circuit with negative control. Confirm that the voltage code '06' matches the required 600 V rating. Ensure mounting torque specifications are followed to maintain thermal interface integrity. Check RoHS compliance status against project requirements.

SCRs - Modules Selection Notes

Select this component when a 600 V blocking capability is required alongside a 105 A continuous current rating. The TO-240AA package facilitates easy heatsink mounting. Consider the 2094 A surge capability for inrush protection scenarios. Evaluate thermal resistance values based on the expected conduction angle and ambient conditions.

SCRs - Modules Part Context

This part belongs to the VS-VSKL105.. series within the AAP Gen 7 family. It shares the 105 A current rating with other variants but differs in voltage codes and circuit configurations. The 'L' designation specifically indicates the SCR/diode doubler circuit with negative control topology.

SCRs - Modules Replacement Considerations

Cross-reference with VS-VSKT105/06 or VS-VSKH105/06 if different circuit topologies are acceptable. Verify pinout compatibility before substitution. Ensure thermal characteristics match the existing heatsink design.