74LVT04PW,112

Inverter Gates Overview

The Nexperia 74LVT04PW,112 is a hex inverter operating within a supply voltage range of 2.7 V to 3.6 V. It features overvoltage tolerant inputs up to 5.5 V and BiCMOS high-speed output drive capabilities. The device supports partial power-down applications via IOFF circuitry, which disables outputs to prevent backflow current. It includes power-up 3-state functionality and bus-hold data inputs to eliminate external pull-up resistors for unused inputs.

Inverter Gates Feature Summary

• IOFF circuitry enables partial power-down mode operation by disabling outputs to prevent damaging backflow currents.
• Overvoltage tolerant inputs allow direct interface with TTL levels without loading the 5 V bus.
• Power-up 3-state ensures outputs assume a high-impedance OFF-state during initial power application.

Inverter Gates Applications

• Partial power-down system designs requiring controlled output states
• Direct interfacing between 3.3 V logic and 5 V buses
• High-speed digital signal inversion in consumer electronics

Inverter Gates Procurement Notes

Verify the specific ordering suffix

Inverter Gates Selection Notes

Select this component when a hex inverter with overvoltage tolerant inputs is required for 3.3 V systems interfacing with 5 V buses. The TSSOP14 package offers space efficiency for surface mount designs. Ensure the design accommodates the specified -40 °C to +85 °C operating temperature range and utilizes the IOFF feature if partial power-down functionality is necessary.

Inverter Gates Part Context

This part belongs to the 74LVT series of low-voltage CMOS logic devices manufactured by Nexperia. The LVT family is designed for 3.3 V applications while maintaining compatibility with older 5 V logic standards through overvoltage tolerance. The 74LVT04 specifically provides six independent inverting gates in a single integrated circuit.

Inverter Gates Replacement Considerations

Check for equivalent hex inverters from other manufacturers that support 3.3 V operation with 5.5 V input tolerance. Verify pinout compatibility and ensure the replacement package matches the TSSOP14 form factor. Confirm that any substitute also supports the required IOFF or partial power-down functionality if applicable.