ADC1410S080HN/C1,5

Analog To Digital Converters (ADC) Overview

The ADC1410S080HN/C1 is a single-channel, 14-bit Analog-to-Digital Converter (ADC) from the NXP ADC1410S series. It operates at a maximum sampling rate of 80 Msps and utilizes a pipelined architecture with output error correction to ensure zero missing codes. The device is powered by a single 3 V analog supply (VDDA: 2.85–3.4 V) and supports a separate digital output supply (VDDO: 1.65–3.6 V). Key electrical parameters include an input bandwidth of 600 MHz, a typical Signal-to-Noise Ratio (SNR) of 72 dBFS, and a Spurious-Free Dynamic Range (SFDR) of 86 dBc. Power dissipation is specified at 430 mW at 80 Msps.

Analog To Digital Converters (ADC) Feature Summary

• 14-bit resolution with pipelined architecture and integrated output error correction for guaranteed linearity.
• Supports CMOS or Low Voltage Differential Signalling (LVDS) Double Data Rate (DDR) digital outputs.
• Integrated Serial Peripheral Interface (SPI) for configuration, including programmable full-scale input range (1 V to 2 V p-p).
• Includes duty cycle stabilizer, fast Out-Of-Range (OTR) detection, and power-down/sleep modes.

Analog To Digital Converters (ADC) Applications

• Wireless and wired broadband communications
• Portable instrumentation and spectral analysis
• Imaging systems and ultrasound equipment
• Software defined radio

Analog To Digital Converters (ADC) Procurement Notes

Verify the specific suffix HN/C1 corresponds to the HVQFN40 package (SOT618-1) and the 80 Msps speed grade. Confirm that the ordering information matches the required sample rate variant within the ADC1410S family, as other variants exist with different maximum frequencies.

Analog To Digital Converters (ADC) Selection Notes

Select this component when a 14-bit resolution and 80 Msps sampling rate are required. Ensure the design accommodates the 600 MHz input bandwidth and differential clock inputs. Consider the thermal resistance (Rth j-a: 22.5 K/W) and power dissipation (430 mW) for adequate heat sinking in the HVQFN40 package.

Analog To Digital Converters (ADC) Part Context

This part belongs to the ADC1410S series, which includes variants with sampling rates of 65, 105, and 125 Msps. The devices are pin-compatible with the ADC1210S and ADC1010S series, facilitating upgrades or downgrades in resolution or speed within the same footprint.

Analog To Digital Converters (ADC) Replacement Considerations

Pin-compatible alternatives within the same series include ADC1410S065HN/C1, ADC1410S105HN/C1, and ADC1410S125HN/C1. These share the same package and interface but differ in maximum sampling frequency and associated dynamic performance metrics.