CNY17F3S

Description：OPTOISOLTR 5.3KV 1CH TRANS 6-SMD
Series：-
Mfr：onsemi
Package：Tube

SKU:3afbd78b40c7 Category: Transistor, Photovoltaic Output Optoisolators Brand: onsemi

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

CNY17F3S is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists onsemi. Its product description is OPTOISOLTR 5.3KV 1CH TRANS 6-SMD. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for CNY17F3S

Description：OPTOISOLTR 5.3KV 1CH TRANS 6-SMD
Series：-
Mfr：onsemi
Package：Tube
Number of Channels：1
Voltage - Isolation：5300Vrms
Current Transfer Ratio (Min)：100% @ 10mA
Current Transfer Ratio (Max)：200% @ 10mA
Turn On / Turn Off Time (Typ)：2µs, 3µs
Rise / Fall Time (Typ)：1µs, 2µs
Input Type：DC
Output Type：Transistor
Voltage - Output (Max)：70V
Current - Output / Channel：50mA
Voltage - Forward (Vf) (Typ)：1.35V
Current - DC Forward (If) (Max)：100 mA
Vce Saturation (Max)：300mV
Operating Temperature：-55°C ~ 100°C
Mounting Type：Surface Mount
Package / Case：6-SMD, Gull Wing
Supplier Device Package：6-SMD

Transistor, Photovoltaic Output Optoisolators datasheet and documents for CNY17F3S

CNY17F3S

Transistor, Photovoltaic Output Optoisolators Overview

The CNY17F3S is a surface-mount optocoupler featuring a single channel with an NPN phototransistor output. It provides electrical isolation of 5300 Vrms between input and output circuits. The device accepts DC input with a maximum forward current of 60 mA and a typical forward voltage of 1.65 V. Key performance parameters include a collector-emitter saturation voltage of 400 mV maximum, a collector current rating of 50 mA, and a collector-emitter voltage of 70 V. The unit operates within a temperature range of -40°C to +100°C.

Transistor, Photovoltaic Output Optoisolators Feature Summary

Provides high-voltage electrical isolation for signal transmission
Utilizes an NPN phototransistor for reliable digital switching
Designed for compact surface-mount assembly

Transistor, Photovoltaic Output Optoisolators Applications

Industrial control systems requiring circuit isolation
Consumer electronics power supply feedback loops
General-purpose signal isolation in low-speed data transfer

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the specific suffix variant against the target datasheet requirements. Confirm that the component status aligns with project longevity needs, as certain variants may be obsolete or discontinued. Ensure compliance with RoHS directives and check moisture sensitivity levels for proper storage handling prior to assembly.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when a standard transistor-output optocoupler is required for basic isolation tasks. Consider the 5300 Vrms isolation rating for safety compliance. Evaluate the package dimensions against PCB space constraints. Verify that the current transfer ratio meets the logic level requirements of the receiving circuit.

Transistor, Photovoltaic Output Optoisolators Part Context

This part belongs to the CNY17 family of optocouplers, which are widely used for general-purpose isolation. The 'S' suffix typically denotes a surface-mount package configuration. These devices are commonly found in applications needing galvanic separation between microcontroller logic and higher voltage loads.