DG1206ETJ+

$6.96

Description：IC MUX 16:1 160OHM 32TQFN
Series：-

SKU:864f7cd9b9ab Category: Analog Switches, Multiplexers, Demultiplexers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

DG1206ETJ+ is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC MUX 16:1 160OHM 32TQFN. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for DG1206ETJ+

Description：IC MUX 16:1 160OHM 32TQFN
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube
Switch Circuit：-
Multiplexer/Demultiplexer Circuit：16:01
On-State Resistance (Max)：160Ohm
Channel-to-Channel Matching (ΔRon)：30Ohm
Voltage - Supply, Single (V+)：-
Voltage - Supply, Dual (V±)：±5V ~ 20V
Switch Time (Ton, Toff) (Max)：400ns, 400ns
-3db Bandwidth：150MHz
Charge Injection：-
Channel Capacitance (CS(off), CD(off))：4pF, 15pF
Current - Leakage (IS(off)) (Max)：1nA
Crosstalk：-80dB @ 1MHz
Operating Temperature：-40°C ~ 85°C (TA)
Mounting Type：Surface Mount
Package / Case：32-WFQFN Exposed Pad
Supplier Device Package：32-TQFN (5x5)
Number of Circuits：1

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for DG1206ETJ+

DG1206ETJ+

Analog Switches, Multiplexers, Demultiplexers Overview

The DG1206ETJ+ is a single 16-channel analog multiplexer switch manufactured by Analog Devices Inc./Maxim Integrated. It operates within a supply voltage range of ±5V to ±20V (bipolar) or +10V to +20V (single supply). The device features a typical on-resistance of 100Ω and maximum off-leakage current of 2nA for the DG1206 variant. It utilizes four address inputs (A3-A0) and an enable pin, housed in a 32-lead TQFN package rated for -40°C to +85°C.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Ultra-low capacitance and charge injection for fast settling times
Rail-to-rail operation with wide bipolar or single supply support
GPIO-compatible control logic with dedicated enable input

Analog Switches, Multiplexers, Demultiplexers Applications

Automatic Test Equipment Systems
Data Acquisition Systems
Sample-and-Hold Systems
Communication Systems
Audio and Video Routing

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific suffix against the manufacturer's ordering guide to confirm package type and RoHS compliance status. Confirm availability directly with authorized distributors as lead times may vary. Ensure the selected part number matches the required channel configuration and thermal performance specifications for the target application environment.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select the DG1206ETJ+ for applications requiring a single 16-channel multiplexing path. Compare against the DG1207EUI+ if a dual 8-channel differential architecture or TSSOP packaging is preferred. Evaluate the on-resistance flatness and leakage current requirements against the electrical characteristics tables provided in the datasheet for the intended supply voltage conditions.

Analog Switches, Multiplexers, Demultiplexers Part Context

This component belongs to the DG1206/DG1207 family of low-leakage analog switches. The ETJ+ designation specifically identifies the 32-lead TQFN package variant of the DG1206 single 16-channel multiplexer. This family is designed to replace older CMOS multiplexers where low distortion and high isolation are critical for signal integrity.