EL5160ISZ-T7

Instrumentation, Op Amps, Buffer Amps Overview

The EL5160ISZ-T7 is a single-channel high-speed current feedback operational amplifier manufactured by Renesas Electronics. It features a -3dB bandwidth of 200 MHz and a slew rate of 1.7 kV/us. The device operates on a supply voltage range from 5 V to 10 V with a typical operating supply current of 850 uA. Key electrical parameters include an input offset voltage of 5 mV, a common-mode rejection ratio of 50 dB, and a power supply rejection ratio of 65 dB. Input noise density is specified at 4 nV/sqrt Hz. It is housed in an SOIC-8 surface-mount package and supports industrial temperature operation from -40 C to +85 C.

Instrumentation, Op Amps, Buffer Amps Feature Summary

• Integrates fast enable and disable functionality to reduce supply current to approximately 14 µA per amplifier when inactive.
• Supports single or dual supply operation within a 5 V to 10 V span, suitable for portable and battery-powered equipment.
• Delivers high-speed performance with a 200 MHz bandwidth and 1.7 kV/us slew rate for video and monitor applications.

Instrumentation, Op Amps, Buffer Amps Applications

• High-speed video and monitor signal processing
• Battery-powered and handheld portable devices
• Cable drivers and RGB amplifiers

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify component authenticity through authorized channels as the EL5160ISZ-T7 is listed as obsolete. Confirm RoHS compliance status via official datasheets before integration. Check for moisture sensitivity level requirements during storage and handling. Ensure replacement strategies are in place due to end-of-life status. Validate package dimensions against PCB footprint specifications.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component for designs requiring low-power consumption alongside high-speed signal integrity. The enable pin offers significant power savings in standby modes compared to standard op-amps. Consider the SOIC-8 package for ease of assembly. Evaluate the 5 mV input offset voltage against system accuracy requirements. Verify that the 850 uA supply current aligns with thermal and battery life constraints.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the EL5160 series of low-power current feedback amplifiers. It shares architectural similarities with the EL5161 but includes an additional control pin for enable/disable operations. The series is designed to bridge the gap between speed and power efficiency in analog signal chains.

Instrumentation, Op Amps, Buffer Amps Replacement Considerations

Consult official documentation for direct substitutes. The EL5161 lacks the enable feature. Cross-reference with EL5260 or EL5360 for dual or quad configurations with similar enable capabilities.