ET85602

$0.43

Description：10MHz OPA
Series：-
Mfr：ETEK MICROELECTRONICS
Package：Tape & Reel (TR)

SKU:2b107c4517dd Category: Instrumentation, Op Amps, Buffer Amps Brand: ETEK MICROELECTRONICS

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

ET85602 is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists ETEK MICROELECTRONICS. Its product description is 10MHz OPA. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for ET85602

Description：10MHz OPA
Series：-
Mfr：ETEK MICROELECTRONICS
Package：Tape & Reel (TR)
Amplifier Type：CMOS
Number of Circuits：-
Output Type：Rail-to-Rail
Slew Rate：6V/µs
Gain Bandwidth Product：-
Current - Input Bias：-
Voltage - Input Offset：-
Current - Supply：550µA (x2 Channels)
Current - Output / Channel：-
Voltage - Supply Span (Min)：-
Voltage - Supply Span (Max)：-
Operating Temperature：-40°C ~ 125°C (TA)
Grade：-
Qualification：-
Mounting Type：Surface Mount
Package / Case：8-SOIC (0.154", 3.90mm Width)
Supplier Device Package：8-SOP
-3db Bandwidth：-

Instrumentation, Op Amps, Buffer Amps datasheet and documents for ET85602

ET85602

Instrumentation, Op Amps, Buffer Amps Overview

The ET85602 is a dual-channel low-voltage operational amplifier manufactured by ETEK MICROELECTRONICS. It features a CMOS architecture with rail-to-rail output capability, designed for applications requiring high performance within a supply voltage range of 1.8V to 5.5V. The device offers a gain-bandwidth product of 10MHz and a slew rate of 6V/µs. Total supply current consumption is 550µA for both channels. It operates reliably across an extended temperature range from -40°C to +125°C.

Instrumentation, Op Amps, Buffer Amps Feature Summary

Dual-channel configuration optimized for low-voltage operation
Rail-to-rail output stage for maximum dynamic range
CMOS technology ensuring low power consumption

Instrumentation, Op Amps, Buffer Amps Applications

Internal current sensing circuits with common-mode voltage near ground
Voltage detection systems
Voltage reset monitoring

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific manufacturer designation, as sources indicate potential variations between ETEK and Etek Microelectronics. Confirm package type and tape & reel specifications against official datasheets before ordering. Ensure the supplier provides valid traceability documentation for the -40°C to +125°C operating range.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when a dual op-amp with rail-to-rail output is required in space-constrained, low-voltage designs. The 10MHz bandwidth suits moderate-speed signal processing. Consider the 550µA total current draw for battery-powered applications where efficiency is critical compared to higher-current alternatives.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the family of general-purpose operational amplifiers from ETEK MICROELECTRONICS. It complements other devices like the ET85601, targeting consumer electronics and precision analog signal conditioning. The dual-channel format allows for cost-effective implementation of differential or multi-stage filtering circuits.