F1010T112GV

Overview

The Hoffman F1010T112GV is a Lay-In NEMA Type 1 galvanized wireway straight section designed for indoor cable management. It features a 10-inch by 10-inch cross-section and a 12-inch length, constructed from 14/16 gauge steel with a galvanized finish. The open-side design facilitates safe wire laying. It holds UL 870, CUL, and CSA C22.2 approvals.

Feature Summary

• Lay-in flat-cover design allows wires to be laid directly into the channel without threading.
• Galvanized steel construction provides corrosion resistance for indoor environments.
• NEMA Type 1 rating offers protection against falling dirt and limited liquid ingress.

Applications

• Indoor electrical panel wiring troughs
• Industrial control cabinet cable routing
• Commercial building wireway runs

Procurement Notes

Verify that the specific order matches the F1010T112GV designation for the 10x10x12 inch dimensions. Confirm the galvanized finish requirement aligns with project specifications. Ensure compatibility with existing Hoffman lay-in accessories and covers. Check for required certifications such as UL 870 or CSA C22.2 depending on regional regulations.

Selection Notes

Select this model when a rigid, open-top wireway solution is needed for organizing multiple cables in a confined space. The 10x10 inch capacity suits moderate cable volumes. The galvanized finish is appropriate for standard indoor industrial settings where high humidity or chemical exposure is not present. Consider adjacent straight sections and elbows for continuous runs.

Part Context

This component belongs to the nVent Hoffman Lay-In Wireway series, which provides modular solutions for enclosing and protecting electrical conductors. The series utilizes a standardized system of straight sections, elbows, and covers to create flexible wiring pathways within enclosures and panels.

Replacement Considerations

Direct substitutes include other manufacturers' NEMA Type 1 galvanized wireways with identical 10x10x12 inch internal dimensions. Verify that alternative parts meet the same UL 870 or CSA standards. Ensure mounting hole patterns are compatible if replacing an installed unit.

FAQ

Is this wireway suitable for outdoor use?

No, the NEMA Type 1 rating is intended for indoor applications only. Outdoor use requires a higher rating such as NEMA 3R or 4.

What material is used for the F1010T112GV?

It is constructed from steel with a galvanized finish to provide durability and corrosion resistance.