G280626G052

Overview

The nVent Hoffman G280626G052 is a SpectraCool air conditioner designed for outdoor-indoor environmental control. It provides a cooling capacity of 6000 BTU at 60Hz and 6400 BTU at 50Hz, corresponding to power outputs of 1757 Watts and 1874 Watts respectively. The unit operates on a single-phase 230 VAC supply, drawing 4.6 Amps at 60Hz and 5.8 Amps at 50Hz. Physical dimensions are 28.55 inches in height, 16.97 inches in width, and 10.1 inches in depth. The device features a basic mechanical thermostat and weighs approximately 93.00 lbs.

Feature Summary

• SpectraCool design suitable for both outdoor and indoor installation environments
• Dual-frequency capability supporting 50Hz and 60Hz operational standards
• Basic mechanical thermostat control system for temperature regulation

Applications

• Environmental control for electrical enclosures
• Temperature management for industrial equipment housings
• Cooling solutions for mild steel or stainless steel telecom enclosures

Procurement Notes

Verify the specific frequency requirement (50Hz or 60Hz) against the site power infrastructure, as this impacts the cooling capacity and amperage draw. Confirm that the physical dimensions fit the designated enclosure space. Ensure the voltage rating matches the available 230 VAC single-phase supply. Check warranty terms, as factory warranties may not apply to all sales channels.

Selection Notes

Select this model when a cooling capacity between 6000 and 6400 BTU is required for large electrical enclosures. Consider the dual-frequency operation if the equipment will be deployed in regions with varying grid standards. The outdoor-indoor rating allows for flexible placement options. Verify that the RAL 7035 Light Gray color meets aesthetic requirements for the installation site.

Part Context

This component belongs to the Hoffman ProLiNe G2 series, which allows standard electrical components to be configured into interchangeable solutions. The G28 series specifically addresses higher cooling demands compared to lower-capacity units like the 2000 BTU eco-friendly models. It is part of the broader nVent Hoffman portfolio of environmental control products designed to safeguard electrical equipment.

Replacement Considerations

No direct substitute part numbers are publicly confirmed in the provided documentation. When replacing, ensure the new unit matches the 230V single-phase input and similar physical footprint. Verify that any alternative maintains the same BTU output for the specific operating frequency to prevent thermal issues.