LT1215CS8

Instrumentation, Op Amps, Buffer Amps Overview

The LT1215CS8 is a dual, single-supply precision operational amplifier manufactured by Analog Devices. It features a typical gain-bandwidth product of 23MHz and a slew rate of 50V/ms. The device operates on supply voltages between 2.5V and 36V, with inputs including ground and outputs swinging to the negative rail. Key electrical characteristics include a maximum input offset voltage of 450mV, low noise density of 12.5nV/√Hz, and a minimum output drive current of 30mA. It is housed in an 8-lead SOIC package.

Instrumentation, Op Amps, Buffer Amps Feature Summary

• High DC precision eliminates system trimming requirements
• Fast settling time for accurate signal processing
• Single-supply operation with ground-referenced inputs
• Low input noise voltage and current specifications

Instrumentation, Op Amps, Buffer Amps Applications

• Active filters requiring high frequency performance
• Photodiode amplifiers for light detection
• DAC current-to-voltage conversion circuits
• Battery-powered instrumentation systems

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific suffix CS8 corresponds to the 8-lead plastic SOIC package configuration. Confirm that the component meets RoHS compliance standards required for your assembly process. Ensure the operating temperature range aligns with your environmental design constraints before finalizing procurement.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this part when high speed and precision are required in a single-supply environment. The 23MHz bandwidth supports applications needing fast response times. Consider thermal dissipation limits if driving heavy loads at high supply voltages, as power consumption increases with load current and supply voltage.

Instrumentation, Op Amps, Buffer Amps Part Context

This component belongs to the LT1215/LT1216 family of precision op amps. The LT1216 is the quad version of this amplifier. Both devices share identical electrical characteristics but differ in channel count. This family is designed to provide high-frequency performance typically found in dual-supply amplifiers while operating from a single power source.

Instrumentation, Op Amps, Buffer Amps Replacement Considerations

Consult manufacturer documentation for qualified substitutes. Verify pin compatibility and electrical parameter equivalence before substitution.

Instrumentation, Op Amps, Buffer Amps FAQ

What is the maximum supply voltage for the LT1215CS8?

The total supply voltage range is from 2.5V to 36V.

Can the inputs be driven below the negative supply rail?

Yes, the inputs can be driven approximately 700mV below the negative supply without damage or phase reversal, provided the output does not need to sink current.