MBR30150PT_T0_00001

Diode Arrays Overview

The MBR30150PT_T0_00001 is a Schottky barrier rectifier from the Panjit MBR3040PT series, rated for a maximum repetitive peak reverse voltage of 150 V and a maximum average forward current of 30 A. It utilizes a TO-247AD molded plastic case with solder-plated terminals. The device exhibits a typical thermal resistance (RθJC) of 1.4 °C/W and operates within a junction temperature range of -65 to +175 °C. Maximum DC blocking voltage is 150 V, while the maximum RMS voltage is 105 V. Peak forward surge current reaches 275 A under specified conditions.

Diode Arrays Feature Summary

• Guardring structure provides enhanced overvoltage protection capabilities.
• Flame retardant epoxy molding compound ensures Underwriters Laboratory Flammability Classification 94V-O compliance.
• Designed for low power loss and high efficiency in switching applications.

Diode Arrays Applications

• Low voltage, high frequency inverters
• Free wheeling circuits
• Polarity protection applications

Diode Arrays Procurement Notes

Verify the specific part number against official manufacturer documentation to confirm electrical ratings and mechanical specifications. Ensure compatibility with required thermal management solutions given the TO-247AD package constraints. Confirm that the component meets applicable environmental directives such as EU RoHS standards before integration into final designs.

Diode Arrays Selection Notes

Select this component when a 150 V reverse voltage rating and 30 A continuous current capacity are required. The TO-247AD package facilitates effective heat dissipation through direct mounting. Consider the 1.4 °C/W thermal resistance for proper heatsink sizing. Verify that the operating environment remains within the specified -65 to +175 °C junction temperature limits.

Diode Arrays Part Context

This component belongs to the MBR3040PT series of Schottky barrier rectifiers manufactured by Panjit International Inc. The series encompasses various voltage ratings ranging from 40 V to 200 V, all sharing a common 30 A current capability and TO-247AD mechanical footprint. This standardization allows for design flexibility across different voltage requirements within the same physical constraint.

Diode Arrays Replacement Considerations

Compatible substitutes include other models within the MBR3040PT series, such as MBR30100PT or MBR30200PT, provided the voltage rating aligns with circuit requirements. Cross-brand replacements must match the 30 A current rating, 150 V minimum reverse voltage, and TO-247AD package dimensions to ensure mechanical and electrical interchangeability.

Diode Arrays FAQ

What is the maximum non-repetitive surge current for the MBR30150PT?

The maximum non-repetitive surge current is 275 A, measured as an 8.3 ms single half sine-wave superimposed on the rated load.

How does the device handle capacitive loads?

For capacitive loads, the forward current must be derated by 20% to maintain safe operating conditions.

What is the typical junction capacitance behavior?

Junction capacitance varies with reverse bias voltage, decreasing as the applied reverse voltage increases, as illustrated in the typical characteristic curves.