S9012-I-AP

Single Bipolar Transistors Overview

The S9012-I-AP is a PNP bipolar junction transistor manufactured by MCC. It features a maximum collector-emitter voltage of -40 V and a continuous collector current of 50 mA. The device has a maximum power dissipation of 310 mW and a transition frequency of 600 MHz. DC current gain is specified at a minimum of 70 under standard test conditions. It operates within a temperature range of -55°C to 150°C and utilizes a TO-92 through-hole package.

Single Bipolar Transistors Feature Summary

• PNP configuration for complementary switching applications
• High-frequency operation capability up to 600 MHz
• Robust thermal performance with 310 mW power dissipation
• Wide operating temperature range for industrial environments

Single Bipolar Transistors Applications

• General-purpose signal amplification
• Complementary pairs in audio circuits
• Switching loads in low-power digital logic
• Driver stages for relay or LED control

Single Bipolar Transistors Procurement Notes

Verify the specific suffix 'I' against official MCC documentation to confirm binning or grade variations, as datasheets may not explicitly detail suffix differences. Confirm RoHS compliance status via the manufacturer's latest environmental declaration. Check for end-of-life notices or alternative package options if long-term supply stability is required for production.

Single Bipolar Transistors Selection Notes

Select this component when a PNP counterpart to the NPN S9018 is needed for complementary circuit designs. Ensure the -40 V breakdown voltage meets the system requirements. Consider the TO-92 package constraints for thermal management and PCB layout space. Verify that the 50 mA current rating aligns with the load specifications.

Single Bipolar Transistors Part Context

This part belongs to the S901x series of small-signal transistors from Micro Commercial Components. These devices are widely used in consumer electronics and general-purpose electronic equipment due to their cost-effectiveness and reliable performance in low-power applications. The series typically includes both NPN and PNP variants for easy pairing.

Single Bipolar Transistors Replacement Considerations

• S9012-G-AP
• S9012-BP

Single Bipolar Transistors FAQ

What is the maximum collector-emitter voltage for the S9012-I-AP?

The maximum collector-emitter voltage (Vceo) is -40 V.

Is the S9012-I-AP suitable for high-frequency applications?

Yes, it has a transition frequency (fT) of 600 MHz, making it suitable for RF and high-speed switching tasks.

What package type does the S9012-I-AP use?

It uses a TO-92 (TO-226AA) through-hole package with three leads.