BM2LB150FJ-CE2

$1.74

Description：IC PWR SWITCH N-CHAN 1:1 SOP-J8
Series：-
Mfr：Rohm Semiconductor
Package：Tape & Reel (TR),Cut Tape (CT)

SKU:2b26a1e0e332 Category: Power Distribution Switches, Load Drivers Brand: Rohm Semiconductor

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

BM2LB150FJ-CE2 is listed in the Power Distribution Switches, Load Drivers range at ChipApex. The manufacturer field lists Rohm Semiconductor. Its product description is IC PWR SWITCH N-CHAN 1:1 SOP-J8. Review the specifications below when checking this part for your BOM.

Power Distribution Switches, Load Drivers specifications for BM2LB150FJ-CE2

Description：IC PWR SWITCH N-CHAN 1:1 SOP-J8
Series：-
Mfr：Rohm Semiconductor
Package：Tape & Reel (TR),Cut Tape (CT)
Switch Type：General Purpose
Number of Outputs：2
Ratio - Input:Output：1:01
Output Configuration：Low Side
Output Type：N-Channel
Interface：On/Off
Voltage - Load：3V ~ 5.5V
Voltage - Supply (Vcc/Vdd)：3V ~ 5.5V
Current - Output (Max)：6.5A
Rds On (Typ)：150mOhm
Input Type：Non-Inverting
Features：-
Fault Protection：Over Current, Over Temperature, Over Voltage
Operating Temperature：-40°C ~ 150°C (TJ)
Mounting Type：Surface Mount
Supplier Device Package：8-SOP-J
Package / Case：8-SOIC (0.154", 3.90mm Width)
Grade：Automotive
Qualification：AEC-Q100

Power Distribution Switches, Load Drivers datasheet and documents for BM2LB150FJ-CE2

BM2LB150FJ-CE2

Power Distribution Switches, Load Drivers Overview

The BM2LB150FJ-CE2 is a two-channel low-side power switch IC designed for automotive applications, qualified to AEC-Q100 standards. It operates within a supply voltage range of 3 V to 5.5 V and supports a maximum drain-source voltage of 42 V. The device features a typical on-resistance of 150 mΩ and a maximum on-resistance of 320 mΩ. It provides a DC output current of 1.1 A at an ambient temperature of 85°C, with an overcurrent limit minimum of 6.5 A. The component is housed in an SOP-J8 package and functions across a junction temperature range of -40°C to +150°C.

Power Distribution Switches, Load Drivers Feature Summary

Integrates built-in overcurrent limiting circuit (OCP) and thermal shutdown circuit (TSD) for robust protection.
Supports direct control from CMOS logic ICs, simplifying interface design.
Monolithic construction combines a CMOS control block and power MOSFET on a single chip.
Qualified for automotive use under AEC-Q100 Grade 1 standards.

Power Distribution Switches, Load Drivers Applications

Automotive load switching
Power distribution systems
Low-side driver circuits

Power Distribution Switches, Load Drivers Procurement Notes

Verify the specific suffix CE2 to confirm the packaging configuration matches project requirements. Confirm that the AEC-Q100 Grade 1 qualification aligns with target automotive reliability standards. Ensure the SOP-J8 package dimensions are compatible with the intended PCB footprint. Check functional safety support status if system-level safety analysis is required.

Power Distribution Switches, Load Drivers Selection Notes

Select this model when a two-channel low-side switch with 42 V capability is required. The 150 mΩ typical on-resistance offers efficient power handling for moderate current loads. Consider the 1.1 A continuous output rating against peak load demands. Verify compatibility with 3 V to 5.5 V logic control signals for seamless integration.

Power Distribution Switches, Load Drivers Part Context

This component belongs to the BM2LB series of automotive power switch ICs from ROHM Semiconductor. It represents a GEN1 generation product designed for general-purpose automotive power distribution. The series focuses on integrating protection features directly into the power stage to reduce external component count.