BS170RLRA

Description：MOSFET N-CH 60V 500MA TO92-3
Series：-
Mfr：onsemi
Package：Tape & Reel (TR)

SKU:29dda6dd3e3c Category: Single FETs, MOSFETs Brand: onsemi

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

BS170RLRA is listed in the Single FETs, MOSFETs range at ChipApex. The manufacturer field lists onsemi. Its product description is MOSFET N-CH 60V 500MA TO92-3. Review the specifications below when checking this part for your BOM.

Single FETs, MOSFETs specifications for BS170RLRA

Description：MOSFET N-CH 60V 500MA TO92-3
Series：-
Mfr：onsemi
Package：Tape & Reel (TR)
FET Type：N-Channel
Technology：MOSFET (Metal Oxide)
Drain to Source Voltage (Vdss)：60 V
Current - Continuous Drain (Id) @ 25°C：500mA (Ta)
Drive Voltage (Max Rds On, Min Rds On)：10V
Rds On (Max) @ Id, Vgs：5Ohm @ 200mA, 10V
Vgs(th) (Max) @ Id：3V @ 1mA
Gate Charge (Qg) (Max) @ Vgs：-
Vgs (Max)：±20V
Input Capacitance (Ciss) (Max) @ Vds：60 pF @ 10 V
FET Feature：-
Power Dissipation (Max)：350mW (Ta)
Operating Temperature：-55°C ~ 150°C (TJ)
Grade：-
Qualification：-
Mounting Type：Through Hole
Supplier Device Package：TO-92 (TO-226)
Package / Case：TO-226-3, TO-92-3 Long Body, Formed Leads

Single FETs, MOSFETs datasheet and documents for BS170RLRA

BS170RLRA

Single FETs, MOSFETs Overview

The onsemi BS170RLRA is an N-channel enhancement mode MOSFET designed for general-purpose switching applications. It features a maximum drain-source voltage (Vds) of 60 V and a continuous drain current (Id) of 500 mA. The device is housed in a TO-92 package with three pins, suitable for through-hole mounting. Key electrical parameters include a maximum drain-source resistance (Rds(on)) of 5 Ω at a gate-source voltage (Vgs) of 4 V, and a typical gate charge (Qg) of 1.6 nC at Vgs = 10 V. The component supports a power dissipation (Pd) of 830 mW and operates within a temperature range of -55°C to +150°C.

Single FETs, MOSFETs Feature Summary

N-channel enhancement mode construction for standard logic-level switching
Through-hole TO-92 packaging for reliable board mounting
Avalanche-rated capability for robust operation in inductive loads

Single FETs, MOSFETs Applications

General-purpose low-side switching
Load switching for small inductive loads
Driver circuits for relays and solenoids

Single FETs, MOSFETs Procurement Notes

Verify the specific suffix RLRA indicates tape and reel packaging when ordering bulk quantities. Confirm the manufacturer part number matches the required datasheet revision. Ensure the procurement channel provides traceability documentation consistent with onsemi standards. Check for any specific handling requirements associated with the TO-92 form factor during assembly.

Single FETs, MOSFETs Selection Notes

Select this component for applications requiring a 60 V breakdown voltage and moderate current handling up to 500 mA. The TO-92 package is appropriate for prototyping or low-volume production where through-hole technology is preferred. Consider the 5 Ω Rds(on) for efficiency calculations in low-power circuits. Evaluate thermal management needs based on the 830 mW power dissipation limit in the intended enclosure environment.

Single FETs, MOSFETs Part Context

The BS170 series is a long-standing family of N-channel MOSFETs widely used in consumer electronics and industrial control. The BS170RLRA variant specifically denotes the reel-packaged version of the standard BS170 transistor. This part serves as a fundamental discrete semiconductor solution for basic amplification and switching tasks in analog and digital circuits.