FBA04VA600VB-00

Chip Ferrite Bead Overview

The FBA04VA600VB-00 is a leaded ferrite bead inductor manufactured by Taiyo Yuden. It features an axial package with dimensions of 3.5 mm diameter and 8.5 mm length. The component provides an impedance of 60 Ohms at a test frequency of 50 MHz. It supports a maximum DC current of 7 A and has a maximum DC resistance of 1 mOhm. The operating temperature range extends from -25°C to +85°C.

Chip Ferrite Bead Feature Summary

• Provides high-frequency noise suppression through axial ferrite bead design
• Capable of handling high direct current loads up to 7 Amperes
• Features low DC resistance for minimal signal loss in power lines

Chip Ferrite Bead Applications

• High-current power line filtering
• EMI suppression in industrial electronics
• Noise reduction in automotive electrical systems

Chip Ferrite Bead Procurement Notes

This component is officially listed as discontinued or end-of-life by the manufacturer. Availability is restricted, and distributors may not stock this item. Verify current supply status and lifecycle notifications before integration into new designs. Sourcing may require checking secondary markets or obsolete inventory holders.

Chip Ferrite Bead Selection Notes

Select this part only if axial form factor and 7A current rating are required. Ensure the 60 Ohm impedance at 50 MHz matches the target noise spectrum. Consider physical size constraints due to the 8.5 mm length. Evaluate alternative active or surface-mount solutions if space or availability is critical.

Chip Ferrite Bead Part Context

Part of the FB series ferrite beads from Taiyo Yuden. Designed for axial mounting on printed circuit boards. Used primarily for common-mode noise attenuation in power circuits. Distinct from chip-style ferrites by its through-hole construction and higher current capacity.

Chip Ferrite Bead Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided documentation. Due to the discontinued status, no direct equivalent replacements are verified. Designers should consult manufacturer catalogs for updated series or evaluate generic axial ferrite beads with matching 60 Ohm impedance and 7A current ratings.