HSMS-270C-BLKG

RF Diode Overview

The HSMS-270C-BLKG is a Schottky diode manufactured by Broadcom Limited, housed in an SOT-323-3 surface-mount package. It features a single configuration with silicon technology. Key electrical parameters include a repetitive peak reverse voltage (Vrrm) of 15 V and a forward voltage (Vf) of 550 mV. The device supports a continuous forward current (If) of 750 mA and a forward surge current (Ifsm) of 1 A. Reverse leakage current (Ir) is specified at 200 nA. Operating temperature range spans from -65°C to +150°C.

RF Diode Feature Summary

• Utilizes Schottky barrier technology for low forward voltage drop and fast switching characteristics.

RF Diode Applications

• RF detection circuits
• High-speed switching applications
• Signal demodulation

RF Diode Procurement Notes

Verify component authenticity through authorized distributors or official manufacturer channels due to end-of-life status. Confirm RoHS compliance details via the latest datasheet. Check for obsolescence notifications and product change notices prior to procurement to ensure supply chain stability and regulatory adherence.

RF Diode Selection Notes

Select this component for applications requiring low capacitance and high-speed rectification within a compact SOT-323 footprint. Ensure the 15 V reverse voltage rating exceeds circuit peak voltages. Verify thermal management capabilities given the 150°C maximum junction temperature limit and 750 mA current handling capacity.

RF Diode Part Context

This part belongs to the HSMS series of RF Schottky diodes from Broadcom Limited. It is designed for high-frequency applications where low noise and fast recovery are critical. The BLKG suffix indicates specific packaging and tape-and-reel configuration suitable for automated surface-mount assembly processes.

RF Diode Replacement Considerations

Public confirmed substitute part numbers: None identified in verified documentation. Consider HSMS-270B-BLKG or HSMS-2702-BLKG for functional equivalents, though pinout and exact specifications must be cross-referenced with respective datasheets before substitution.