MBR1690DC_R2_00001

Diode Arrays Overview

The Panjit MBR1690DC_R2_00001 is a surface-mount Schottky barrier rectifier in the D2PAK/TO-263 package. It features a maximum average forward current of 16A and a maximum repetitive peak reverse voltage of 90V. The device exhibits a typical thermal resistance of 2.0°C/W and supports a peak forward surge current of 150A. Operating junction temperatures range from -55°C to +150°C, with storage capabilities extending up to +175°C.

Diode Arrays Feature Summary

• Utilizes low forward voltage characteristics for high efficiency and reduced power loss.
• Constructed with flame retardant epoxy molding compound rated 94V-O.
• Designed for high surge capacity and robust performance in free-wheeling applications.

Diode Arrays Applications

• Low voltage, high frequency inverters
• Free-wheeling circuits
• Polarity protection

Diode Arrays Procurement Notes

Verify the specific ordering suffix against official documentation to confirm packaging orientation and compliance status. Confirm that the component meets required environmental standards before integration into final assemblies. Ensure all technical parameters align with design specifications prior to procurement.

Diode Arrays Selection Notes

Select this component for designs requiring high current handling in a surface-mount configuration. Evaluate thermal management requirements based on the specified junction-to-case thermal resistance. Consider derating curves for capacitive loads when determining operational limits within the circuit architecture.

Diode Arrays Part Context

This part belongs to the MBR1640DC through MBR16200DC series, which share identical physical packages and current ratings but vary in reverse voltage capabilities. The series provides a standardized solution for general-purpose rectification across different voltage requirements while maintaining consistent mechanical dimensions.

Diode Arrays Replacement Considerations

Cross-reference electrical parameters such as peak reverse voltage and forward current with alternative components. Verify package compatibility and pinout alignment to ensure direct substitution without modifying the printed circuit board layout.

Diode Arrays FAQ

What is the maximum DC blocking voltage for this component?

The maximum DC blocking voltage is 90V.

Does the plastic package meet specific flammability standards?

Yes, the package utilizes flame retardant epoxy molding compound classified as 94V-O by Underwriters Laboratory.

How does the device handle surge currents?

It supports a peak forward surge current of 150A for an 8.3ms single half sine-wave superimposed on rated load.