MBR2X060A045

Diode Arrays Overview

The MBR2X060A045 is a Schottky rectifier module manufactured by GeneSiC Semiconductor. It features two independent diodes housed in an electrically isolated SOT-227 package with a base plate. The device supports a maximum repetitive peak reverse voltage of 45 V and a maximum DC blocking voltage of 45 V. Each leg provides an average forward current rating of 120 A at a case temperature of 110 °C, with a peak forward surge current capability of 800 A per leg. The junction-to-case thermal resistance is 0.80 °C/W per leg. Operating temperatures range from -40 °C to 150 °C for both junction and storage conditions.

Diode Arrays Feature Summary

• Electrically isolated base plate design within the SOT-227 package
• High surge current capability rated at 800 A per leg
• Low forward voltage drop characteristics typical of Schottky technology
• Non-ESD sensitive construction

Diode Arrays Applications

• DC-DC converter circuits
• Free-wheeling rectification in power supplies
• High-frequency switching applications requiring low loss

Diode Arrays Procurement Notes

Verify the specific datasheet version and manufacturer documentation before integration. Confirm that the SOT-227 mounting interface matches your thermal management system requirements. Ensure the 45 V reverse voltage rating aligns with your circuit's peak operating conditions. Check for any recent product discontinuation notices or alternative part recommendations from the supplier.

Diode Arrays Selection Notes

Select this component when a dual-diode configuration with electrical isolation is required in a compact form factor. The 120 A per leg rating suits moderate to high-current applications. Consider the 0.80 °C/W thermal resistance for heatsink calculations. Verify that the 45 V voltage rating provides sufficient margin for your specific DC bus or output voltage levels.

Diode Arrays Part Context

This module belongs to the MBR2X series of silicon Schottky rectifiers designed for high-efficiency power conversion. The series utilizes standard SOT-227 packaging to facilitate easy mounting on printed circuit boards or direct chassis attachment via the isolated base plate. It serves as a discrete solution for applications needing dual independent rectification paths.

Diode Arrays Replacement Considerations

Consult official GeneSiC Semiconductor documentation for verified cross-reference part numbers. Do not substitute based solely on pin compatibility without verifying electrical ratings and thermal characteristics.